
When it comes to lorry dimensions, three pieces of information are crucial: external dimensions for site access, internal dimensions for the freight and the clear loading opening for loading. The permissible external dimensions depend on the country of use and the vehicle combination. The actual loading area, however, depends on the specific body.
This guide helps with choosing a vehicle, pallets and bulky packages. Do not use legal maximum dimensions as the guaranteed loading space dimensions of a booked vehicle.
The British overview states 12 m for a single lorry, 16.50 m for the usual articulated lorry and 18.75 m for a lorry with a trailer. Approved longer semi-trailers have their own operating requirements: up to 15.65 m trailer length and 18.55 m total length. Sources:Department for Transport: Vehicle lengthsandGuide to longer semi-trailers.
The German limit of 4m must not be adopted as a general British height limit.Transport Scotlandexplains that there is no general legal vehicle height limit. The actual running height and the height signage determine route planning. When travelling to mainland Europe, the rules of all transit countries also apply.
| Vehicle or dimension | Regular EU reference value |
|---|---|
| Rigid lorry: length | 12.00 m |
| Articulated lorry: overall length | 16.50 m |
| Lorry with trailer: total length | 18.75 m |
| General outside width | 2.55 m |
| Temperature-controlled construction under the prescribed conditions | 2.60 m |
| Total height | 4.00 m |
The values in the table come from Directive 96/53/EC, Annex I. Vehicle design, individual component lengths and exceptions also matter. The 16.50 m figure includes the tractor unit and semi-trailer. It is not the length of the cargo floor.
The following EU values are a reference for regular cross-border transport. Special national rules, permitted longer combinations and local restrictions must be additionally examined. A permissible vehicle height is not a guarantee of free passage.

A concrete example is the Schmitz Cargobull S.CS UNIVERSAL – KP+. Its data sheet states 13.62 m internal length, 2.48 m internal width, 2.68 m internal height and 2.60 m side loading clearance. These values apply to the configuration described there. Other trailers may have different dimensions.
| Dimension in the manufacturer example | Value | For planning |
|---|---|---|
| Inside length | 13.62 m | Length of usable loading area |
| Inside width | 2.48 m | Clear internal width |
| Interior height | 2.68 m | Free space above the loading floor |
| Side loading opening: height | 2.60 m | Limitation when loading from the side |
The specification is an example, not a universal trailer size. A package 2.65 m high can fit below a ceiling 2.68 m high, but cannot pass upright through a side opening only 2.60 m high. Confirm the loading method before booking.
Schmitz Cargobull S.CS UNIVERSAL – KP+ (PDF)
| Vehicle type | Important information before booking |
|---|---|
| Panel van | Interior length, width between wheel arches, door opening and remaining payload |
| 7.5 or 12 tonne lorry | Body dimensions, axle loads and, if applicable, load capacity of the tail lift |
| Curtainsider semi-trailer | Internal dimensions, side opening and distances between the stanchions |
| Refrigerated trailer | Usable interior space after deducting the insulation and cooling technology |
| Lorry with trailer | Dimensions of each loading area individually; no continuous cargo space via the coupling |
Rigid lorries and articulated lorries have different cargo layouts. A weight category does not define cargo dimensions. Request the measurements of the actual vehicle.
The width of the body is not automatically the entire width including mirrors and attachments. For a gate you need the actual vehicle width and sufficient space for movement. A straight driveway and a right-angle driveway are different situations. Photograph narrow gates and driveways and indicate their clear width.
When specifying “loading height” it must be clarified which of these sizes is meant. Damage, removed parts, a lifting device or other loading can change the loading path. Measure the cargo in the intended transport position.
In the event of excess dimensions, it must be clarified before the journey whether permits, accompaniment or an alternative route are required. A simple volume calculation does not replace this check.
Before booking, provide the dimensions and weight of every item, the collection and delivery addresses, and the loading equipment available at both locations. Ask DAGO Express to confirm the usable cargo space and door openings of the vehicle assigned to your shipment.
DAGO Express freight transport · Business transport services · Request a transport quote
No. Wheelbase, body, cabin and equipment influence the usable area. The vehicle class alone is not a sufficient indication.
No. The total length includes the tractor unit. Interior length, exterior trailer length and the entire vehicle combination must be considered separately.
No. The doorway may be lower than the interior ceiling. The forklift or other lifting equipment also needs enough space, and the goods must remain in a safe position.
No. US vehicle and trailer classes as well as state and federal requirements vary. Information in feet and inches must be converted neatly into metres. A US shipment requires its own vehicle and route verification.
More freight planning guides are available in the DAGO logistics blog. Sources checked on 11 November 2026. Each regulation and equipment specification applies only to the scope described.